روناک صنعت رامونا نماینده فروش و تعمییرات تجهیزات آزمایشگاه مهندسی عمران و مکانیک آماده ارائه خدمات آزمایشگاهی شامل فروش تجهیزات به شرح ذیل:
تمام تجهیزات ارائه شده دارای یکسال گارانتی و ۱۰ سال خدمات پس از فروش میباشد.درادامه تصاویر و مشخصات برخی از تجهیزات به طور گزینشی معرفی شده است جهت دریافت لیست دستگاه ها لطفا کاتالوگ ها را دانلود کنید
جهت اطلاعات بیشتر تماس بگیرید
تجهیزات آزمایشگاه مکانیک خاک:
ACE Automatic Computerized Oedometer
main features
>Fully automatic PC-controlled test execution
> Three conditions for the automatic switch to the next step are available: time, swelling, rate of secondary consolidation.
> Testing can continue 24 hours a day, 7 days a week without interruption giving greater throughput of tests with a considerable cost decrease
> Automated loading eliminates negative factors such as operator error and manual handling of dead weights
> 15 kN maximum loading capacity, 10 mm travel displacement transducer
> Real-time data and graph display
> Single ACE software installation controls up to 60 units
> Test management software supplied including calibration facility > High speed LAN network communication
Hydraulic Consolidation Cells
main features
>Continuous monitoring of test data (vertical load, pore pressure, vertical compression) and detailed plotting of the consolidation curve
> Relatively short time to per- form the test: less than half the time of an incremental loading consolidation test
> More accurate and reliable evaluation of consolidation and compressibility parameters
> Particularly suitable for cohesi- ve saturated soils
Direct/residual Shear Machine
main features
> Reversible stepping motor for residual strength testing
> Infinitely variable speed drive from 0.00001 to 9.99999 mm/ min
> Compact ergonomic design
> Safety device to prevent overload and overtrave
l > Can be fitted with mechanical(analogue) measuring equipment,or electronic with data acquisition and processing
Triaxial load frames
main features
> Designed for soil testing laboratories to perform UU, CU, CD and stress path* (compression/extension) tests
> Suitable for automatic PC-controlled triaxial testing (see AUTORIAX 2 system)*
> Allows dynamic tests to be performed when fitted with a suitable actuator (see Dynatriax system)*
> Maximum compression capacity: 50 kN or 100 kN
> Speed range from 0.00001 to 99.99999 mm/min
> Maximum sample diameter (for triaxial testing): 150 mm
> The quality of the design avoids vibrations that may affect the specimen or measure- ments accuracy
> Ideal solution for advanced and research laboratories that require high productivity and high quality testing
> High-contrast 4 x 20-character display with 6-key membrane keyboard*
> Very wide variable speed range suitable to perform also unconfined, CBR and
Local strain measurement in triaxial testing
main features
> Suitable for specimen diameters from 38 to 150 mm
> Maximum working pressure of 3500 kPa
> Light and compact construction with reduced dimensions
> For use with Banded triaxial cells fitted with suitable upgrading kits and Double-wall triaxial cells > Vertical and radial deformation measured directly on the triaxial test specimen
> Suitable for static and dynamic data acquisition by triaxial systems
Pressure and volume controller
main features
> Generates water pressure regulated under closed-loop control
> Measures the volume change, by counting the steps of the stepper motor
> High-resolution measurement of pressure and volume change
> High volume capacity > Lightweight and with a small footprint.
> No air compressor is required